Hitch Valve (HV1) Diagnostic Trouble Codes
Although the diagnostic codes listed below are not a complete
list of the diagnostic trouble codes, they do reflect codes which
may be observed while operating the tractor and have corrective action
that the operator can take. Many codes which appear may be corrected
simply by cycling key switch or by following the solution on the CommandCenter page,
then cycling key switch.
If corrective action cannot be taken after cycling power to
the tractor or if there are any questions, contact your John Deere dealer.
|
Hitch Valve (HV1) Diagnostic Trouble Codes
|
|
Diagnostic Trouble Code
|
Display
|
Solution
|
|
HV1 158.4
|
Hydraulic System
|
Reduce electrical load or increase engine RPM to attempt vehicle
system recovery.
|
|
HV1 4084.16
|
Hydraulic System
|
Cycle external control lever or restart engine to attempt vehicle
system recovery.
|
|
HV1 4084.18
|
Hydraulic System
|
Cycle external control lever or restart engine to attempt vehicle
system recovery.
|
|
HV1 4084.7
|
Hydraulic System
|
Cycle external control lever or restart engine to attempt vehicle
system recovery.
|
|
HV1 4085.7
|
Hydraulic System
|
Cycle external control lever or restart engine to attempt vehicle
system recovery.
|
|
CommandCenter
is a trademark of Deere & Company
John Deere
is a trademark of Deere & Company
|
OURX935,0001104-19-20100517
|
|