Aborting and/or Clearing iTEC Sequence

  1. Select iTEC.

  2. Select Advanced Settings softkey.

    RXA0110773
    RXA0110773-UN-09SEP10

    CommandCenter™ Main Menu → iTEC → iTEC On → Advanced Settings

    RXA0107045
    RXA0107045-UN-29JUL10

    iTEC Edit Page

    A - Start/Stop Record Sequence

    B - Save/Enter Softkey

    While on the iTEC ™ Edit page, ensure iTEC is ON.


  3. Select Start/Stop Record Sequence softkey. Select Start/Stop Record Sequence softkey again.

  4. Select Save/Enter softkey (B). Sequence is now cleared.

CommandCenter is a trademark of Deere & Company
iTEC is a trademark of Deere & Company

OURX935,000124C-19-20100730