Adjusting Reverse-Forward Speed Ratio (AutoQuad™ PLUS Only)

RXA0103941-UN-24JUL09

Transmission

RXA0112385-UN-21DEC10

A - Shift Set Point Indicator

B - Reverse/Forward Speed Ratio

C - Startup Gear

D - Softshift

E - PTO Adjust

F - Speed Matching

During a shuttle shift, a reverse gear can be selected to match the forward gear. The selected gear can be up to three gears faster than the forward gear or up to three gears slower than the forward gear.

Press transmission softkey.

Reverse/Forward Ratio can be set to operate independent of each other, the same or between 1 to 3 gears slower or 1 to 3 gears faster than selected forward gear. With Reverse/Forward Speed Ratio (B) highlighted, rotate command dial to select desired setting.

Independent allows the tractor to remember the last forward and reverse gear setting. Once the gear is manually changed in the reverse direction, the gear will automatically go back to the last gear when changing directions. If the gear is not manually changed when in reverse direction, then the forward gear and reverse gear will remain the same when changing directions.