Auto Shift Set-Points (AutoQuad™ PLUS Only)

RXA0103941-UN-24JUL09

Transmission

RXA0112385-UN-21DEC10

A - Shift Set Point Indicator

B - Reverse/Forward Speed Ratio

C - Startup Gear

D - Softshift

E - PTO Adjust

F - Speed Matching

The following transmission control functions can be modified to meet certain applications:

• Transmission Shift Points (A)
• Reverse-Forward Speed Ratio (B)
• Startup Gear Setting (C)
• Speed Matching (F)
• Automatic Shifting Maximum Gear Setting

Automatic gear shift points can be modified based on engine speed and throttle position.

Power mode provides automatic shifting at a higher engine rpm level. This mode is recommended for heavy draft applications where it is desirable to maintain a higher engine droop before shifting occurs.

Economy mode will allow the transmission to upshift at a lower engine rpm providing an opportunity for faster acceleration rates, additional fuel savings, and quieter operation. Economy mode is recommended for transport or light draft applications.

Press transmission softkey.

Rotate Command Dial counterclockwise to move indicator (A) to the left for Economy Mode and transmission will shift at a lower engine rpm. Rotate Command Dial clockwise to move indicator (A) to the right for Power Mode and transmission shifts at higher engine rpm. Adjust to Economy Mode for light load applications and to Power Mode for high load applications.

Rotate Command Dial to select desired setting then press Confirm button to save selection.