General Weight Split Guidelines

Weight split requirements are based on type of implement or attachment being used. A primary consideration is to maintain sufficient weight on front and rear axles to provide stability and steering security under both field and transport conditions. Other factors as indicated in following tables must also be considered.

General Weight Split Guidelines

 
 

Towed

25/75

 

Semi-Integral

35/65

 

Integral

35/65

   

In all cases percentage on front axle must be increased if needed for steering security and stability.

MFWD: No more than 35% on front axle. This is required for Power Hop control. (See Power Hop Control section for details.)

CAUTION: Do not exceed front tire carrying capacities when using high percentages of front weight. See Tire Load Capacities in Front Wheels, Tires, and Treads in this manual.

ZE59858,0000484-19-20110324