Service Interval Chart—Daily or 10 Hours, 50 Hours, 250 Hours, 500 Hours, and 1000 Hours

Item

Daily or 10 Hours

50 Hours

250 Hours

500 Hours

1000 Hours

Check Engine Oil Level

    

Drain Water Separator

    

Check Transmission/Hydraulic Oil Level

    

Lubricate MFWD or TLS™ Plus Kingpins, Tie Rod Ends, Axle Pivot fittings, and U-Joints1

 

  

Lubricate Front and Rear PTO Shafts2

 

  

Check Wheels

 

   

Lubricate Rear Hitch Components3

 

  

Lubricate Front Hitch (If Equipped)3

 

  

Check Manual Brakes

  

  

Check Secondary Brake (If Equipped)

  

  

Check Neutral Start System

  

  

Check Transmission PARK Position

  

  

Drain Fuel Tank Sump

  

  

Check MFWD Axle Housing and Wheel Hub Oil Level

  

  

Check Front PTO Housing Oil Level (If Equipped)

  

  

Check Swinging Drawbar for Wear

  

  

Check 3 in 1 Hitch for Wear (If Equipped)

  

  

Check and Lubricate Pick-Up Hitch (If Equipped)

  

  

Lubricate Cab Suspension System (If Equipped)

  

  

Change Engine Oil and Filter4

  

 

Check Wheels and Wheel Weight Bolts5

   

 

Clean Dual Beam Radar Sensor

   

 

Replace Fuel Filters6

   

 

Inspect Air Intake System

   

 

Back Flush Optional Water Separator (If Equipped)

   

 

Service Optional Water Separator Filter Element (If Equipped)

   

 

Clean Fuel Tank Vent Filter

    

Replace Cab Air and Recirculation Filters6

    

Clean MFWD Axle Vent Filter

    

Test Coolant and Add Coolant Conditioner

    

Checking Triple Link Suspension Plus (TLS™ Plus) Accumulator Charge Pressure

    

Checking Cab Suspension Accumulator Charge Pressure

    

1 Lubricate daily or 10 hours if operated in wet conditions, or when AutoTrac is used.
2 Lubricate daily or every 10 hours if used in wet conditions.
3 Lubricate hitch every 50 hours if used daily. Extend interval to 250 hours if hitch not used regularly.
4 Perform oil change in accordance with Changing Engine Oil and Filter in Fuels, Lubricants and Coolant section of this Operator’s Manual.
5 During first week of operation, check torque at 3 hours, 10 hours and daily.
6 Interval can vary, according to operation conditions.

ZE59858,00004FA-19-20110324