Engine Interface Control Unit (EIC) Diagnostic Trouble Codes

Although the diagnostic codes listed below are not a complete list of the diagnostic trouble codes, they do reflect codes which may be observed while operating the tractor and have corrective action that the operator can take. Many codes which appear may be corrected simply by cycling key switch or by following the solution on the CommandCenter™ page, then cycling key switch.

If corrective action cannot be taken after cycling power to the tractor or if there are any questions, contact your John Deere™ dealer.

Diagnostic Trouble Code	System	Solution
EIC 003695.14	Exhaust Filter System	Exhaust Filter restricted. AUTO filter cleaning is disabled. Enable AUTO filter cleaning on the Engine settings page per Operators Manual.
EIC 003719.15	Exhaust Filter System	Exhaust Filter restricted. Assist AUTO cleaning by setting engine speed above 1200 rpm or start a parked filter cleaning per Operators Manual.