Selective Control Valve Units (SV) Diagnostic Trouble Codes

Although the diagnostic codes listed below are not a complete list of the diagnostic trouble codes, they do reflect codes which may be observed while operating the tractor and have corrective action that the operator can take. Many codes which appear may be corrected simply by cycling key switch or by following the solution on the CommandCenter™ page, then cycling key switch.

If corrective action cannot be taken after cycling power to the tractor or if there are any questions, contact your John Deere™ dealer.

All though specific SCV number is listed in the table, the following trouble codes may be true of any SCV on the tractor. If an SV code is displayed, make sure that you note exactly which SCV it is and take appropriate action for that specific SCV as described in the solution column for the trouble code.

Diagnostic Trouble Code

System

Solution

SV1 000158.04

Hydraulic System

SCV I supply voltage low. Reduce electrical load or increase engine rpm to attempt vehicle recovery.

SV1 004084.07

Hydraulic System

SCV I float position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SV1 004084.16

Hydraulic System

SCV I beyond commanded spool position. Cycle external control lever or restart engine to attempt vehicle recovery.

SV1 004084.18

Hydraulic System

SCV I commanded spool position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SV1 004085.07

Hydraulic System

SCV I Neutral position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SV2 000158.04

Hydraulic System

SCV II supply voltage low. Reduce electrical load or increase engine rpm to attempt vehicle recovery.

SV2 004084.07

Hydraulic System

SCV II float position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SV2 004084.16

Hydraulic System

SCV II beyond commanded spool position. Cycle external control lever or restart engine to attempt vehicle recovery.

SV2 004084.18

Hydraulic System

SCV II commanded spool position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SV2 004085.07

Hydraulic System

SCV II Neutral position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SV3 000158.04

Hydraulic System

SCV III supply voltage low. Reduce electrical load or increase engine rpm to attempt vehicle recovery.

SV3 004084.07

Hydraulic System

SCV III float position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SV3 004084.16

Hydraulic System

SCV III beyond commanded spool position. Cycle external control lever or restart engine to attempt vehicle recovery.

SV3 004084.18

Hydraulic System

SCV III commanded spool position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SV3 004085.07

Hydraulic System

SCV III Neutral position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SV4 000158.04

Hydraulic System

SCV IV supply voltage low. Reduce electrical load or increase engine rpm to attempt vehicle recovery.

SV4 004084.07

Hydraulic System

SCV IV float position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SV4 004084.16

Hydraulic System

SCV IV beyond commanded spool position. Cycle external control lever or restart engine to attempt vehicle recovery.

SV4 004084.18

Hydraulic System

SCV IV commanded spool position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SV4 004085.07

Hydraulic System

SCV IV Neutral position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SV5 000158.04

Hydraulic System

SCV V supply voltage low. Reduce electrical load or increase engine rpm to attempt vehicle recovery.

SV5 004084.07

Hydraulic System

SCV V float position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SV5 004084.16

Hydraulic System

SCV V beyond commanded spool position. Cycle external control lever or restart engine to attempt vehicle recovery.

SV5 004084.18

Hydraulic System

SCV V commanded spool position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SV5 004085.07

Hydraulic System

SCV V Neutral position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SV6 000158.04

Hydraulic System

SCV VI supply voltage low. Reduce electrical load or increase engine rpm to attempt vehicle recovery.

SV6 004084.07

Hydraulic System

SCV VI float position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SV6 004084.16

Hydraulic System

SCV VI beyond commanded spool position. Cycle external control lever or restart engine to attempt vehicle recovery.

SV6 004084.18

Hydraulic System

SCV VI commanded spool position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SV6 004085.07

Hydraulic System

SCV VI Neutral position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SVJ 000158.04

Hydraulic System

Front Hitch supply voltage low. Reduce electrical load or increase engine rpm to attempt vehicle recovery.

SVJ 004084.07

Hydraulic System

Front Hitch float position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SVJ 004084.16

Hydraulic System

Front Hitch beyond commanded spool position. Cycle external control lever or restart engine to attempt vehicle recovery.

SVJ 004084.18

Hydraulic System

Front Hitch commanded spool position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SVJ 004085.07

Hydraulic System

Front Hitch Neutral position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SVK 000158.04

Hydraulic System

Front Hitch supply voltage low. Reduce electrical load or increase engine rpm to attempt vehicle recovery.

SVK 004084.07

Hydraulic System

Front Hitch float position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SVK 004084.16

Hydraulic System

Front Hitch beyond commanded spool position. Cycle external control lever or restart engine to attempt vehicle recovery.

SVK 004084.18

Hydraulic System

Front Hitch commanded spool position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SVK 004085.07

Hydraulic System

Front Hitch Neutral position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SVL 000158.04

Hydraulic System

Front Hitch supply voltage low. Reduce electrical load or increase engine rpm to attempt vehicle recovery.

SVL 004084.07

Hydraulic System

Front Hitch float position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SVL 004084.16

Hydraulic System

Front Hitch beyond commanded spool position. Cycle external control lever or restart engine to attempt vehicle recovery.

SVL 004084.18

Hydraulic System

Front Hitch commanded spool position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SVL 004085.07

Hydraulic System

Front Hitch Neutral position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SVM 000158.04

Hydraulic System

SCV XIII supply voltage low. Reduce electrical load or increase engine rpm to attempt vehicle recovery.

SVM 004084.07

Hydraulic System

SCV XIII float position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SVM 004084.16

Hydraulic System

SCV XIII beyond commanded spool position. Cycle external control lever or restart engine to attempt vehicle recovery.

SVM 004084.18

Hydraulic System

SCV XIII commanded spool position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.

SVM 004085.07

Hydraulic System

SCV XIII Neutral position not reached. Cycle external control lever or restart engine to attempt vehicle recovery.


CommandCenter is a trademark of Deere & Company

John Deere is a trademark of Deere & Company

ZE59858,00005BC-19-20110324