Tractor Equipment Interface Control Unit (TEI) Diagnostic Trouble Codes

Although no diagnostic codes are listed below, normally only codes which are observed and can be corrected by the operator are listed. During normal tractor operation some trouble codes may appear which may be corrected simply by cycling key switch or by following the solution on the CommandCenter™ page, then cycling key switch.

If corrective action cannot be taken after cycling power to the tractor or if there are any questions, contact your John Deere™ dealer.

Diagnostic Trouble Code	System	Solution
TEI 522550.14	Implement System	Communication fault. System with restricted function. Remove incompatible device from ISOBUS.