Independent Link Suspension Dual Front Tire, Fender and Steering
Stop Settings
Maximum single wheel tread spacing is 2235 mm (88 in.).
Maximum dual outer setting is 3657 mm (144 in.).
Maximum static front axle weight, without liquid ballast or
duals, is 10800 kg (23800 lbs).
Some wheel settings may exceed 2794 mm (110 in.) mean tread
spacing. These settings are allowed, but at reduced axle loads as
shown in the following table.
NOTE: To determine the mean tread spacing, add tread spacing
for inner tire (center to center) and tread spacing for outer tire
(center to center). Divide by two.
|
Axle Load Table
|
|
Mean Tread Spacing
|
Allowable Static Axle Weight
|
|
2794 mm (110 in.)
|
10800 kg (23800 lbs)
|
|
2845 mm (112 in.)
|
10390 kg (22900 lbs)
|
|
2895 mm (114 in.)
|
10020 kg (22090 lbs)
|
|
2946 mm (116 in.)
|
9670 kg (21320 lbs)
|
NOTE: Listed below are instructions for using the Independent
Link Suspension Dual Front Tire, Fender and Steering Stop Settings
Table.
The first row under heading gives the row spacing in millimeters
and inches.
Column one lists the tire size.
The first number in column identifies either an eight or sixteen
position rim is used. The first letter indicates which example to
follow, either Eight or Sixteen Position Wheel Settings. The next
number is the correct steering stop position. The last letter is the
fender setting, which is taken from the 1500 MFWD and Independent
Link Suspension Fender Settings block in this Operator's Manual.
| |
Row Spacing
|
| |
508 mm (20 in.)
|
558.8 mm (22 in.)
|
762 mm (30 in.)
|
|
Tire Size
|
Inner Tire
2032 mm (80 in.)
|
Dual Tire
3048 mm (120 in.)
|
Inner Tire
2235.2 mm (88 in.)
|
Dual Tire
3352.8 mm (132 in.)
|
Inner Tire
1524 mm (60 in.)1
|
Dual Tire
3048 mm (120 in.)
|
|
420/85R34
|
N/A
|
N/A
|
N/A
|
N/A
|
8A3A
|
8B3A
|
|
480/70R34
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
* Tool box must be removed to avoid hitting tires.
| |
Row Spacing
|
| |
812 mm (32 in.)
|
914.4 mm (36 in.)
Front duals for flotation.
|
1016 mm (40 in.)
Front duals for flotation. Not for row cultivation.
|
|
Tire Size
|
Inner Tire
2032 mm (64 in.)
|
Dual Tire
3251.2 mm (128 in.)
|
Inner Tire
1828.8 mm (72 in.)
|
Dual Tire
3651 mm (144 in.)
|
Inner Tire
2032 mm (80 in.)
|
Dual Tire
3651 mm (144 in.)
Tire not in row.
|
|
420/85R34
|
8B3B
|
8D3B
|
8D3D
|
8H3D
|
8F3F
|
8H3F *
|
|
480/70R34
|
8B3A
|
8D3A
|
8D3C
|
8H3C
|
8F3F
|
8H3F
|
* Tool box must be removed to avoid hitting tires.
|
1 To achieve
a 1676 mm (66 In.) row spacing setting, use 1625mm (64 in.) row spacing
and order one 25.4 mm (1") spacer set per side through your John Deere
dealer.
|
OURX935,00000A6-19-20100920
|
|