Connecting ISO Implements and ISO Display Options

CAUTION:

RXA0120592-UN-14SEP11

Improper operation can cause unintended implement movement.

To avoid death or serious injury to a bystander, understand how this display operates the functions of the implement.

Read and understand the implement Operator Manual.

This message occurs when the system detects an ISOBUS implement. For more information, READ OPERATOR MANUALS FOR ISOBUS IMPLEMENTS.

1. Select Menu button.

2. Select Display.

3. Select Advanced Settings softkey.

4. Select Multiple Display.

In some cases it is necessary to operate with more than one ISO terminal display. In such cases configure CommandCenter to recognize and operate in conjunction with a second ISO display. The following tables distinguish between single, multiple, and custom settings.

Single Display Mode

	Display Mode:	Single
	GreenStar :	On
	Original GreenStar Monitor:	On
	Implement Bus:	On
	Functional Instance
	GreenStar:	1
	Original GreenStar Monitor:	1
	Implement Bus:	1
	Vehicle Bus:	1
Change Settings		Restore Factory Default Settings

If Change Settings box in lower left corner is selected, Restore Factory Default Settings box appears in lower right corner allowing operator the option of restoring factory default settings.

Single Display mode is active when:

• CommandCenter is the only display being used

Multiple Display Mode

	Display Mode:	Multiple
	GreenStar :	Off
	Original GreenStar Monitor:	Off
	Implement Bus:	Off
	Functional Instance
	GreenStar:	1
	Original GreenStar Monitor:	1
	Implement Bus:	1
	Vehicle Bus:	1
Change Settings

Multiple Display mode is active when:

• A second John Deere ISO display is connected.

  Note

  • GreenStar Off
  • Original GS Monitor Off
  • Implement Bus Off
• If settings are changed in this mode, mode is now referred to as Custom Mode.

Custom Display Mode

	Display Mode:	Custom
	GreenStar :	Off
	Original GreenStar Monitor:	Off
	Implement Bus:	On
	Functional Instance
	GreenStar:	1
	Original GreenStar Monitor:	1
	Implement Bus:	1
	Vehicle Bus:	1
Change Settings		Restore Factory Default Settings

Custom Display mode is active when:

• Setting changed Multiple Display Mode

  Note

  • GreenStar Off
  • Original GS Monitor Off
  • Implement Bus On
• If settings are changed in this mode, page reflects change

Note Before disconnecting display, Restore Factory Default Settings in lower right corner must be selected. System reverts to Multiple Display Mode, If it does not, GreenStar will not repopulate CommandCenter after restart.

Change Settings

General Recommendations:

• Ensure that ignition is in OFF position when connecting auxiliary ISO displays or ISO implements.
• Restore Factory Default Settings before disconnecting external ISO display.

Guide For Display Settings for Multiple Display Pages
GreenStar applications	GreenStar applications cannot operate simultaneously on two displays.
Original GreenStar	Original GreenStar monitor cannot operate simultaneously on two displays. NOTE: All Original GreenStar monitor functionality can only be viewed via Original GreenStar display, if equipped.
Implement Bus Virtual Terminal	Implement Bus Virtual Terminal can be active on two ISO displays. Enable Implement Bus to view an ISO implement on the CommandCenter. Disable Implement Bus to view an ISO implement on alternate ISO display. NOTE: Functional instance box (I) may change depending on ISO implement. Consult ISO implement manual.
Tractor Bus Virtual Terminal	Tractor Bus Virtual Terminal cannot be disabled. No adjustment required.