Aborting and/or Clearing iTEC Sequence

  1. Select iTEC.

  2. Select Advanced Settings softkey.

    RXA0116590
    RXA0116590-UN-12MAY11

    CommandCenter Main Menu → iTEC → iTEC On → Advanced Settings

    RXA0107045
    RXA0107045-UN-29JUL10

    iTEC Edit Page

    A - Start/Stop Record Sequence

    B - Save/Enter Softkey

    While on the iTEC Edit page, ensure iTEC is ON.


  3. Select Start/Stop Record Sequence softkey. Select Start/Stop Record Sequence softkey again.

  4. Select Save/Enter softkey (B). Sequence is now cleared.

OURX935,00002FE-19-20110609