Service Interval Chart—1000 Hour—1500 Hour—3000 Hour—5000 Hour and 6000 Hour

Item

1000 Hours

Section 105

1500 Hours

Section 106

3000 Hours

Section 107

3000 Hours

Section 108

5000 Hours

Section 109

6000 Hours

Section 110

Cleaning Fuel Tank Vent Filter 1

•

          

Replacing Cab Fresh Air Filter 2

•

          

Replacing Recirculation Filter 2

•

          

Replacing Primary and Secondary Engine Air Filters 3

•

          

Testing Coolant

•

          

Cleaning MFWD Axle Breather 1

•

          

Draining Differential and Clean Oil Reservoir

  

•

        

Draining PowerShift (PST) Transmission and Cleaning Filter

  

•

        

Draining IVT/AutoPowr Transmission and Cleaning Filter 3

 

•

        

Draining Independent Link Suspension (If Equipped)

  

•

        

Cleaning Hydraulic Oil Suction Screen

  

•

        

Replacing Transmission/Hydraulic Filters And Refilling Transmission/Hydraulic Oil 3

 

•

        

Changing MFWD Or Independent Link Suspension Wheel Hub Oil

  

•

        

Changing MFWD Differential Case Oil

  

•

        

Lubricating Independent Link Suspension Axle—Internal Tie Rod Ball Joints

  

•

        

Lubricating Draft Link Support Shaft Bushing

  

•

        

Checking Auxiliary Drive Belt

  

•

       

Service Fan Drive4

 

•

       

Adjusting Engine Valve Clearance 5 (Tier 2/Stage II only6).

    

•

      

Adjusting Engine Valve Clearance 7 (IT4/Stage IIIB engines only.6).

      

•

    

Replace Engine Crankshaft Torsional Damper 5

       

•

  

Replace Transmission Torsional Damper 5

       

•

  

Draining, Flushing, and Refilling Engine Cooling System  8

         

•

Checking De-aeration Cap And De-aeration Tank

          

•

1 Interval can vary according to operating conditions.
2 Replace every 1000 hours, annually or as required whichever comes first.
3 Replace every 1000 hours, annually or as indicated whichever comes first.
4 See your John Deere™ dealer to schedule service.
5 See your John Deere dealer to schedule service.
6 To confirm which engine your tractor is equipped with, see Record Engine Serial Number in Identification Numbers section of this Operator’s Manual.
7 See your John Deere dealer to schedule service .
8 INITIAL: change interval is 6 years or 6000 hours, provided cooling system is topped off using only John Deere Cool-GARD II and premix and coolant is tested at recommended intervals. SCHEDULED: interval (2 years or 2000 hours) can be extended up to 6 years or 6000 hours depending on coolant used and if coolant is tested at recommended intervals (Reference ”Drain Intervals for Diesel Engine Coolant” in Fuels, Lubricants and Coolant section of Operator Manual).

OURX935,000048D-19-20110915