Requirements for PTO

Before transferring control to implement, prepare implement as indicated in implement Operator's Manual. Transfer control using AutoTracesume switch or TIA resume softkey as presented in the implement Operator's Manual.

The following preconditions have to be met before transferring implement control.

• Operator on seat.
• No PTO system malfunctions.
• PTO remote control off.
• PTO engaged (PTO switch On).

While operating, implement has the ability to engage/disengage PTO.

To withdraw control, turn PTO switch off.

NOTE: Unless the implement is authorized to engage the PTO when the tractor is stationary, the tractor will prevent engagement of the PTO when stationary. The implement is however, allowed to disengage PTO.