Aborting and/or Clearing iTEC Sequence

  1. Select iTEC.

  2. Select Advanced Settings softkey.

    RXA0110773
    RXA0110773-UN-09SEP10

    iTEC→ Advanced Settings

    RXA0110316
    RXA0110316-UN-22SEP10

    iTEC Edit Page

    A - Start/Stop Record Sequence

    B - Save/Enter Softkey

    While on theiTEC™ Edit page, ensure iTEC is “On.”


  3. Select Start/Stop Record Sequence softkey. Select Start/Stop Record Sequence softkey again.

  4. Select Save/Enter softkey (B). Sequence is now cleared.

iTEC is a trademark of Deere & Company

OURX985,000008F-19-20121130