Cold Weather Starting—Starting Fluid

RXA0109138-UN-29JUL10

A - Starting Fluid Switch

B - Ignition Key Switch

CAUTION: Avoid personal injury and damage to the engine. Inject starting fluid only while engine is turning. Follow safety information on the container. Do not carry starting fluid cans inside cab.

CAUTION: Starting fluid is extremely flammable. While using this product do not smoke and extinguish all flames. Turn off all pilot lights, stoves, heaters, electrical motors and other sources of ignition while using this product and/or vapors are still present. Avoid contact of aerosol with battery terminals, solenoid, or other electrical/electronic components. Do not overuse this product. Keep cap on container and store in cool location when not in use.

Turn ignition key (B) and press starting fluid switch (A) once starter has engaged. Release the key after engine starts.

Hold starting fluid switch for two or three seconds after engine starts. Repeat this step until engine runs without faltering.

IMPORTANT: Idle the engine at approximately 1200 rpm with no load for one to two minutes to assure adequate lubrication. Do not operate under full load until engine has reached normal operating temperature.