Drivetrain Protection—9460R, 9510R and 9560R

NOTE: When tractor is loaded to a very low engine speed, the Powershift transmission may default to NEUTRAL, then PARK will engage once wheel speed drops below 1.75 km/h (1.0 mph) for vehicle protection.

To engage transmission, move Powershift transmission lever to PARK, reduce load, and then shift back into desired operating gear.

A TIP Diagnostic code will be stored and displayed when default to PARK condition occurs.

The drivetrain protection system is gear-sensitive and will not be apparent in most situations. It does not affect load starting and only affects operations in gears with maximum operating speeds below 7 km/h (4.4 mph). Full engine horsepower, plus 10 percent power bulge is available in all other gears. With proper ballast, 4WD tractor is traction limited not power limited, at slow ground speeds.

Electronic engine controls provide protection from drivetrain overloading. Engine horsepower is automatically reduced to protect drivetrain components when:

• Air Filter Restriction Warning is activated (CCU 000107.00) the engine performance will be reduced. Service engine air filter immediately.
• Fuel filter(s) become plugged resulting in a loss of power due to a reduction in delivered fuel. Service engine fuel filter immediately.
• See your John Deere Dealer for more details.

Gear	9460R Power	9510R Power	9560R Power
6	453 hp (338 kW)	503 hp (375 kW)	553 hp (412 kW)
5	429 hp (320 kW)	503 hp (375 kW)	503 hp (375 kW)
4	405 hp (302 kW)	479 hp (357 kW)	479 hp (357 kW)
3	382 hp (285 kW)	453 hp (338 kW)	453 hp (338 kW)
2	382 hp (285 kW)	429 hp (320 kW)	429 hp (320 kW)
1	382 hp (285 kW)	429 hp (320 kW)	429 hp (320 kW)