Implement Connection Example 1—Pressure Control Valve Applications (Grain Drills or Air Seeders with Constant Down-Pressure System)—Less Hitch—Standard Hydraulics

RXA0126556-UN-29MAY12

A - Extend Coupler Line

B - Retract Coupler Line

C - Selector Valve

D - Pressure Control Valve

E - Transport Lock Valve

NOTE: For Ag high flow, it is recommended that the hydraulic motor be connected to the top SCV’s (45cc high flow pump).

Not recommended for high flow scraper hydraulics.

For implements using active down force set flow control to continuous and move lever to detent position.

This will cause hydraulic pump to operate at maximum pressure which may cause overheating of hydraulic oil if at the same time outside air temperature is high. To avoid this problem, try not to operate more than one hydraulic motor with tractor hydraulic system when active down force is being used.