Requirements for PTO

Before transferring control to implement, prepare implement as indicated in implement Operator's Manual. Transfer control using AutoTrac™ resume switch or TIA resume softkey as presented in Operating Tractor Implement Automation of this section.

The following preconditions have to be met before transferring implement control.

• Operator sitting on seat.
• No PTO system malfunctions.
• PTO remote control off.
• PTO engaged (PTO switch On).

While operating, implement has the ability to engage/disengage PTO.

To withdraw control, turn PTO switch off.

NOTE: Unless authorized tractor will prevent PTO from engaging when stationary , It is however, allowed to disengage PTO.