Rear PTO Control Unit (RPT) Diagnostic Trouble Codes

Although the diagnostic codes listed below are not a complete list of the diagnostic trouble codes, they do reflect codes which may be observed while operating the tractor and have corrective action that the operator can correct. Many codes which appear may be corrected simply by cycling key switch or by following the solution on the CommandCenter™ page, then cycling tractor power.

If corrective action cannot be taken after cycling power to the tractor or if there are any questions, contact your John Deere™ dealer.

Rear PTO Control Unit (RPT) Diagnostic Trouble Codes
Diagnostic Trouble Code	System	Solution
RPT 001883.00	PTO System	PTO Shaft is turning too fast. Adjust engine speed.
RPT 001883.01	PTO System	PTO shaft is turning too slowly. Adjust engine speed.
RPT 523749.16	Rear PTO System	PTO clutch slipping. Allow clutch to cool before attempting to re-engage PTO.
RPT 524224.14	PTO System	Rear PTO switch disabled. Turn on rear PTO.
RPT 524251.31	PTO System	Operator not present with rear PTO On.