ISOBUS VT

PC16682-UN-18MAR13

This John Deere display supports ISOBUS 11783 compatible controllers. These controllers can be viewed and operated within the ISOBUS Virtual Terminal (VT).

When an ISOBUS controller is connected, graphic files for the user interface are loaded into ISOBUS VT. Then ISOBUS VT provides a means for the operator to navigate through and operate all available functions of ISOBUS controller.

Navigate to ISOBUS VT

1. Select Menu.

2. Select Applications tab.

3. Select ISOBUS VT application.

PC15293-UN-18MAR13

Menu Button

Connected ISOBUS Implements and Controllers

The Generation 4 display loads and communicates with different ISOBUS controllers at the same time. A list of all connected ISOBUS controllers is displayed after selecting menu button.

Select desired ISOBUS controller and press Done button to view controller's user interface.

Troubleshooting

If ISOBUS VT page is no longer operable, but display still is, issue is most likely related to ISOBUS controller. Switch ignition off and restart machine, or unplug ISOBUS controller connector and reconnect.