Use FieldCruise™ with Different Transmission Modes

Change transmission mode by using Transmission Page on CommandCenter™ display. Following is how FieldCruise™ works with different transmission modes:

Full Auto: At full throttle, minimum engine speed is 1200 RPM with PTO off. Transmission downshifts and engine speeds up to FieldCruise™ set speed, to compensate for increasing workloads. Available engine speed range is 1200 RPM to FieldCruise™ set speed.

Custom: Minimum engine speed depends on ECO engine speed setting on transmission page. Transmission downshifts and engine speeds up to FieldCruise™ set speed, to compensate for increasing workloads. Available engine speed range is ECO engine speed setting to FieldCruise™ set speed.

Pedal (If Equipped): FieldCruise™ function is replaced by Engine Set Speed function. Engine speed stays constant at engine speed selected. Hand throttle will take over control of engine speed if moved out of position.

Manual: Operator sets engine speed using hand throttle. Engine speed stays constant, but limited by FieldCruise™ set speed.