Transmission Description and Controls

RXA0127844-UN-22AUG13

RXA0130485-UN-15JAN13

Left Hand Reverser

A - A Range Button

B - B Range Button

C - C Range Button

D - Multi-Range Button

E - Shift Lever

F - Set Speed Adjuster Dial

G - Hand Throttle

H - Left Hand Reverser

CommandQuad™ transmission has a hydraulically shifted range box which provides 20 forward and 20 reverse speeds (40 km/h (25 mph) ECO or 50 km/h (31 mph) ECO versions). Left hand reverser (H) provides fully modulated shift capability between forward and reverse. When shifting directions with left hand reverser (H) and changing ranges, direction must be established before ranges shift. Operator does not have to depress or release clutch pedal when shifting. When performing range shift, lights next to selected range button on CommandARM™ blink until shift is complete. In Auto Mode, engine speed, range, and gear are commanded automatically to achieve set speed and to manage heavy and light loads.

NOTE: During a range shift the clutch will be modulated.

Range Lock Mode: Range buttons (A, B, C) provide three shiftable ranges. Use Range Lock buttons when operating in conditions where range change is not needed or when operating with significant draft load. Changing ranges with significant draft load would result in interruption of ground speed.

Multi-Range Mode: Multi-Range button (D) provides automatic range shifting when in Auto Mode. There are four power shiftable gears in any range. Selected ranges can be shifted manually using shift lever (E) or automatically when shift lever (E) is set in AUTO position.