PTO Requirements

Before transferring control to implement, prepare implement as indicated in implement Operator's Manual. Transfer control using AutoTrac™ resume switch as described in implement Operator's Manual.

Following guidelines must be met before transferring control to implement:

• Operator in seat.
• Functional PTO system.
• PTO remote control off.
• PTO engaged (PTO switch On).

NOTE: Unless implement is authorized to engage PTO when tractor is stopped, tractor will prevent engagement of PTO when stopped. Implement is however, allowed to disengage PTO.

While operating and depending on PTO system capabilities, implement has ability to engage/disengage PTO, change PTO gear or adjust PTO speed.

To disengage control, turn PTO switch off.