SCV Requirements

Before transferring control to implement, prepare implement as indicated in implement Operator's Manual. Transfer control using AutoTrac™ resume switch as described in implement Operator's Manual.

Following guidelines must be met before transferring control to implement:

• Operator in seat.
• SCVs are functional.
• SCV control levers in neutral position.
• SCV levers are not locked.

NOTE: Set maximum SCV flow limit which cannot be exceeded by implement.

NOTE: Unless implement is authorized to adjust SCV flow when tractor is stopped, tractor will prevent SCV flow adjustments when at a stop. Implement is however allowed to stop oil flow.

While operating, implement has ability to:

• Control SCVs during operations.
• Change SCV flow rate up to set limit.

To disengage control:

• Actuate specific SCV lever or...
• Lock SCV lever or...
• Actuate remote control switch on fender.