Date and Time
PC15314-UN-15MAY13
Date and Time
Information from Date and Time application is used for several important functions on system. These include error logging, activations, and data recording.
Date and time are set automatically if a GPS receiver is connected and receiving valid signal. In this case, only set time zone.
Current date and time can be found at any time by selecting Status Center at top of main run page.
NOTE: Date and Time setting affects how Guidance and Documentation data are filtered on display and desktop software.
Navigate to Date and Time
-
Select Menu.
-
Select System tab.
-
Select Date and Time application.
|
DX,PC,DATE-19-20151221 |