Operating System Applications Overview

PC15302-UN-19MAR13

Operating System applications package is installed at the factory, and is updated with periodic software updates from John Deere. These applications are used for basic functions of display.

PC16674-UN-18MAR13

Date and Time

Date and Time

• Information from Date and Time application is used for several important functions on system. These include error logging, activations, and data recording.
• Date and time are set automatically if a GPS receiver is connected and receiving valid signal. In this case, only set time zone.
• It is found on System tab of the display menu.

PC17272-UN-17JUL13

Diagnostics Center

Diagnostics Center

• Diagnostics Center is the one place to find diagnostics for the entire system.
• It is found on System tab of the display menu.

PC16685-UN-18MAR13

Display and Sound

Display and Sound

• Along with display brightness and volume, Display and Sound is used to calibrate display and configure multiple displays.
• It is found on System tab of the display menu.

PC16671-UN-18MAR13

File Manager

File Manager

• Data and setup information can be transferred between displays or compatible desktop software.
• Perform a Factory Data Reset to clear display of user data.
• It is found on System tab of the display menu.

PC16677-UN-18MAR13

Language and Units

Language and Units

• Use Language and Units application to change Language, Number Format, and Units of Measurement.
• It is found on System tab of the display menu.

PC22543-UN-22APR16

Settings Manager

Settings Manager

• Use Settings Manager to load, edit, or save configurations of machine and implement settings.
• It is found on Applications tab of the display menu.

PC15346-UN-11JUL13

Software Manager

Software Manager

• Use Software Manager to update software, activate features, and install onscreen help packages.
• It is found on System tab of the display menu.

PC17262-UN-12JUL13

Users and Access

Users and Access

• Users and Access manages user profiles and locks users out of certain settings.
• It is found on System tab of the display menu.

PC15326-UN-08JUL13

Controls Setup

Controls Setup

• Configures an ISOBUS or tractor joystick to control tractor or implement functions.
• It is found on Applications tab of the display menu.

PC20410-UN-22MAY15

Equipment Manager

Equipment Manager

• The Machine Profile allows operator to configure GPS offsets and machine dimensions.
• The Implement Profile allows operator to configure Implement Connection Type, Working Width, Dimensions, and Recording Triggers.
• It is found on Applications tab of the display menu.

PC17260-UN-11JUL13

Fields and Boundaries

Fields and Boundaries

• Field names are used to organize information so it is easier to find and use data, such as guidance lines.
• Use Fields application to set up clients, farms, and fields.
• Select client, farm, and field to set current location.
• It is found on Applications tab of the display menu.

PC16684-UN-18MAR13

Help Center

Help Center

• Onscreen Help about each application and more is available in Help Center.
• Not all Help languages are installed at the factory. Update display software to install Help for all supported languages.
• It is found on Applications tab of the display menu.

PC16682-UN-18MAR13

ISOBUS VT

PC15293-UN-18MAR13

ISOBUS VT Menu

ISOBUS VT

• Monitor and control ISOBUS 11783 compatible controllers and implements.
• It is found on Applications tab of the display menu.

NOTE: Only one ISOBUS controller can be viewed at a time. If more than one controller is connected, select Menu button within ISOBUS VT to view a list of controllers to choose from.

PC16678-UN-18MAR13

Layout Manager

Layout Manager

• Use Layout Manager to create and modify run pages and shortcut bar so important information and functions can be accessed from the main page.
• It is found on Applications tab of the display menu.

PC15318-UN-16MAY13

Machine Monitor

Machine Monitor

• Machine Monitor displays machine-specific performance values.
• It is found on Applications tab of the display menu.

PC20413-UN-11MAY15

Mapping

Mapping

• Mapping application is used to view spatial features, such as guidance, coverage, work data, and map based prescriptions. (Prescriptions require a CommandCenter™ Premium or Documentation activation.)
• It is found on Applications tab of the display menu.

PC17363-UN-16DEC13

Remote Display Access

Remote Display Access

• Remote Display Access (RDA) allows someone from a remote location to view an operating display.
• It is found on Applications tab of the display menu.

PC17388-UN-15MAY14

StarFire

StarFire™

• The StarFire™ application is used to view StarFire™ Receivers. If more than one receiver is connected, select the desired receiver using the application.
• It is found on Applications tab of the display menu.

PC15317-UN-16MAY13

Work Monitor

Work Monitor

• Work Monitor displays averaged and totaled machine and operation-specific values.
• It is found on Applications tab of the display menu.

PC20415-UN-11MAY15

Work Setup

Work Setup

• Use Work Setup application when changing implements, fields, crops, applying a different product, or selecting a prescription.
• It is found on Applications tab of the display menu.