Machine Sync

Machine Sync controls synchronized movements between tractor and combine. It guides tractor and grain cart to preset position for unloading relative to specific combine.

Machine Sync utilizes AutoTrac™ and its advanced settings to control tractor. Machine Sync system maintains in line and lateral offset between the combine and tractor using information via the machine and StarFire™ 6000 receiver that is transmitted between machines using the Machine Communication Radio.

Machine Sync system contains three important entities:

• Operational zone: area that allows for automation to take over.
• Calibration zone: area that allows for calibration of home point.
• Home point: in line and lateral offset location relative to combine that tractor will return to every time it syncs with specific combine.

Machine Sync, when engaged, guides tractor and grain cart to home point position set in relation to each specific combine. Tractor and grain cart will maintain that position during operation.

For more information on Machine Sync, see John Deere™ Machine Sync operator’s manual.