CommandARM™ Joystick

RXA0133920-UN-11NOV13

CommandARM™ Joystick

RXA0133735-UN-17JUL13

Controls Setup Icon

A - Joystick (If Equipped)

B - Joystick Buttons

C - Joystick Activation Indicator Light

D - Joystick Lock

E - Joystick Rocker Switch

NOTE: Joystick buttons 5-9 (B) cannot be reconfigured at this time. Function may become available for future use.

Joystick is compatible on tractors with up to 6 SCVs.

Joystick Operation:

• Control Setup Icon appears around Controls that may be setup to control other functions. Review Controls Setup page to verify the function of each control.
• Axes of the joystick (A) operates combinations of programmed SCV(s) functions.
• Select transmission gear upshifts and downshifts using joystick buttons (B) 5 and 7 located on top of lever.
• Joystick activation indicator light (C) is ON when joystick is active.
• Joystick lock (D) locks out control by joystick only
• Rocker switch (E) operates combinations of programmed SCV(s) functions.
• Push joystick all the way forward and engage in detent to activate float position. Joystick lever remains in detent until pulled back.