Towing — Axles on Ground—Engine Will Start

RXA0142406
RXA0142406-UN-10JUN14

Hydraulic Oil Reservoir Sight Gauge

RXA0141863
RXA0141863-UN-10JUN14

A - “Full Cold” Mark

B - “Min Cold” Mark

C - NEUTRAL Position

IMPORTANT: Avoid damage to transmission and hydraulic systems. Operate engine above 1250 rpm to provide adequate system lubrication. All pressure indicator lights must be off.

Never tow tractor faster than 8 km/h (5 mph) for a maximum distance of 8 km (5 mile).

  1. Ensure hydraulic oil reservoir level in sight gauge is between “Full Cold” (A) and “Min Cold” (B) marks. See Check Transmission/Hydraulic Reservoir/Axle Oil Level in Daily or 10 Hour Service section of this Operator’s Manual.

  2. Attach tow bar to drawbar.

  3. With transmission in PARK, start tractor.

  4. Operate engine above 1250 rpm.

  5. Move shift lever to NEUTRAL position (C). “N" on cornerpost display will illuminate.

  6. Steer and brake tractor while being towed.

  7. After towing is complete, place shift lever in PARK.

RX32825,000018A-19-20151104