AM, FM, Weather Channel Home Page

RXA0150912-UN-08JAN16
AM, FM, Weather Channel Home Page
NOTE: Refer to Select Radio Source with Generation 4 CommandCenter in
this section of this Operator’s Manual, to learn how to navigate
to AM, FM, Weather Channel home page.
A—Display Area: Displays current
radio activity/information.
B—Manually Tune Forward/Back: Use left or right button to manually tune in desired station. Each
time button is pressed, radio frequency increases or decreases by
standard increment.
C—Next/Previous Station: Select
to seek next available station before or after current station.
D—Scan Button: Select to cycle
through available stations. Each station broadcasts for 5 seconds
before moving to next station. Cycle will end if returns to original
station or by selecting button again.
E—AM/FM/Weather Button Bar: Cycle
through channel presets using toggle bar (FM1, FM2, FMT, AM, AMT,
WX).
F—Presets: Six presets can be
programmed to FM1, FM2, FMT, AM and AMT banks. To change presets,
press preset for 3 seconds, while on desired station, until “beep”
sounds. Press again to tune radio to saved station. Six presets are
pre-programed into WX bank and cannot be changed. FMT and AMT banks
can be set automatically using T-STORE function. For more information,
see Use Premium Radio in this section of this Operator’s Manual.
G—Volume Adjustment: Adjust
volume.
H—Mute: Silence sound.
|
CommandCenter
is a trademark of Deere & Company
|
TO84419,0000087-19-20160111
|
|