Drivetrain Protection—9470R, 9520R, 9570R and 9620R

NOTE: When tractor is operated under heavy load and low engine rpm, Powershift transmission may default to NEUTRAL. PARK will engage once wheel speed drops below 1.75 km/h (1.0 mph) for vehicle protection.

To engage transmission, move Powershift transmission lever to PARK, reduce load, and then shift back into desired operating gear.

A TIP Diagnostic code will be stored and displayed when default to PARK condition occurs.

Drivetrain protection system is gear-sensitive and will not be apparent in most situations. It does not affect load starting and only affects operations in gears with maximum operating speeds below 7 km/h (4.4 mph). Full engine horsepower, plus 10 percent power bulge is available in all other gears. With proper ballast, 4WD tractor is traction limited not power limited, at slow ground speeds.

Electronic engine controls provide protection from drivetrain overloading. Engine horsepower is automatically reduced to protect drivetrain components when:

• Air Filter Restriction Warning is activated (CCU 000107.00) the engine performance will be reduced. Service engine air filter immediately.
• Fuel filter(s) become plugged resulting in a loss of power due to a reduction in delivered fuel. Service engine fuel filter immediately.
• See your John Deere™ Dealer for more details.

Gear	9470R Power	9520R Power	9570R Power	9620R Power
6	470 hp (346 kW)	520 hp (382 kW)	570 hp (419 kW)	620 hp (456 kW)
5	445 hp (327 kW)	520 hp (382 kW)	570 hp (419 kW)	594 hp (437 kW)
4	420 hp (309 kW)	520 hp (382 kW)	570 hp (419 kW)	570 hp (419 kW)
3	397 hp (292 kW)	520 hp (382 kW)	544 hp (400 kW)	544 hp (400 kW)
2	397 hp (292 kW)	520 hp (382 kW)	518 hp (381 kW)	518 hp (381 kW)
1	397 hp (292 kW)	520 hp (382 kW)	518 hp (381 kW)	518 hp (381 kW)