PTO Requirements

Before transferring control to implement, prepare implement as indicated in implement Operator's Manual. Transfer control using AutoTrac™ resume switch as described in implement Operator's Manual.

Following conditions must be met before transferring control to implement:

• Operator in seat.
• Functional PTO system.
• PTO remote control off.
• PTO engaged (PTO switch On).

NOTE: Implement cannot engage PTO when tractor is stopped unless it is authorized to do so. However, implement can disengage PTO at any time including when tractor is stopped..

While operating and depending on PTO system capabilities, implement has ability to engage/disengage PTO, change PTO gear or adjust PTO speed.

To disengage control, turn PTO switch off.