Rear Hitch Requirements

Before transferring control to implement, prepare implement as indicated in implement operator's manual. Transfer control using AutoTrac™ resume switch as presented in implement operator's manual.

Implement can automatically control hitch depth.

Set raise limit using CommandCenter™.

IMPORTANT: Implement cannot exceed limit.

Following guidelines must be met before transferring control to implement:

• Operator in seat.
• Functional hitch system.
• Hitch control lever in neutral position.
• Hitch unlocked.

NOTE: Unless implement is authorized to adjust hitch depth when tractor is at a standstill, tractor will prevent hitch depth adjustments when at a standstill.

To disengage control:

• Move hitch control lever.
• Lock hitch.
• Activate fender mounted hitch switch (if equipped).