6000 Hour Service

Clean:

□ Dual beam radar sensor

□ Optional fuel water separator and filter element

□ Aftertreatment fuel injector—15 L engine1

Check:

□ Engine oil level

□ Transmission-hydraulic oil level

□ Track alignment

□ Track wear

□ Drive and idler wheels and mid-rollers

□ Track trash buildup

□ Drive wheel scraper clearance

□ Undercarriage articulation bumper stops

□ NEUTRAL start system

□ Transmission PARK system

□ Engine air intake system

□ Drawbar support and cap screws

□ Vari-Cool™ fan drive and belt—Final Tier 4/Stage IV engine23

□ Engine coolant freeze point4

□ Auxiliary drive belt and drive belt tensioner—15 L engine

□ Idler wheel hub and mid-roller oil level

□ Engine valve clearance5

□ Suspension mount clearance (narrow track)

Tighten:

□ Drive wheel nuts, idler wheel, and mid-roller cap screws

□ 

 

Change:

□ Engine oil and filter67

□ Fuel filters8

□ Fuel tank vent filters

□ Transmission-hydraulic oil and filters

□ Transmission-hydraulic vent filter

□ Diesel exhaust fluid (DEF) tank vent filter—Final Tier 4/Stage IV engine9

□ SCV pilot valve filter

□ Engine cooling system radiator cap—15 L engine

□ Cab recirculation and fresh air filters10

□ Engine primary and secondary air filters11

□ Transmission drive shaft damper1213

□ Engine crankcase breather filter element—15 L engine

□ Engine coolant14

Lubricate:

□ Rear hitch15

□ Hinge pins

□ Steering pins

□ Telescoping drive shaft

□ Heavy-duty gudgeon bearings

□ Lower drive line bearings16

□ Track tension cylinder

□ PTO drive shaft

□ Vari-Cool™ fan drive—Final Tier 4/Stage IV engine1718

□ Heavy duty lift link pins19

Service Completed Date: __________________ Signature: ________________________________________ Dealer Stamp:

Comments:


Vari-Cool is a trademark of Deere & Company
1 See your John Deere dealer.
2 13.5 L engine.
3 Check annually or every 500 operating hours, whichever occurs first.
4 Check annually or every 1000 operating hours, whichever occurs first.
5 See your John Deere dealer.
6 Service in accordance with information in appropriate Diesel Oil and Filter Service Intervals topic in Engine Oil section of this Operator’s Manual. Record oil used in Service - Record Charts - Engine Oil and Filter.
7 Change at least once per year.
8 Change every 500 operating hours or as indicated, whichever occurs first.
9 Change after first year or first 1500 operating hours, whichever occurs first. After initial service, change every 3 years or 4500 operating hours, whichever occurs first.
10 Change annually or every 1000 operating hours, whichever occurs first.
11 Change annually or every 1000 operating hours, whichever occurs first.
12 Normal duty service is every 4500 operating hours. If used in heavy duty operations (such as scraper applications), change every 3000 operating hours.
13 See your John Deere dealer.
14 INITIAL change interval is 6 years or 6000 operating hours, provided cooling system is topped off using only John Deere Cool-Gard™ II and premix. SCHEDULED interval (2 years or 2000 operating hours) can be extended up to 6 years and 6000 operating hours, depending upon coolant being used. See Drain Intervals for Diesel Engine Coolant in Engine Coolant section of this Operator’s Manual.
15 Under normal usage, lubricate every 250 operating hours. If used daily, lubricate every 50 operating hours.
16 Normal lubrication is every 250 operating hours. If used in extremely wet conditions, lubricate daily or every 10 operating hours.
17 13.5 L engine.
18 Lubricate annually or every 500 operating hours, whichever occurs first.
19 If hitch is in use.

EC82310,00004D7-19-20171027