|
At the Dealer:
□ Predelivery inspection completed
□ All necessary forms and literature available
□ Labels installed
□ Customer specified attachments and options are installed or
available
Retighten wheel bolts after working 3 hours and again after 10 hours. Continue to tighten to specified torque daily during first week of operation.
□ Check hardware is tight on frame, drawbar support, wheels,
and wheel weights or track system components
|
At Delivery Area with Customer:
(shown and explained)
□ All warning labels on machine
□ Location of all serial numbers on machine
□ Operator's Manual
□ Help Text access and function
□ Lubrication and service points on machine and attachments
□ Tire or track maintenance and care
□ Use of lubrication and maintenance schedules
□ Break-in service procedures
□ Warranty coverage and procedure
Failure to follow road transport recommendations
may void tractor warranty. For road transport recommendations see
Transport section of this Operator’s Manual.
|
Demonstrated operating procedures:
□ Engine—throttle, starting and stopping
□ Transmission
□ Steering
□ Brakes
□ Hitch and SCVs
□ Differential lock
□ PTO
□ Three-point hitch adjustment
□ iTEC™ system
□ Lights
□ Wipers
□ Heater
□ Air conditioning
□ CommandCenter™ display and controls
□ Operator's seat
|