Mid-Roller, Drive, and Idler Wheel Fasteners

Avoid operating tractor in grease, oil, or other petroleum chemicals. Avoid spilling these materials on track and wheels during service.

If tractor is operated with loose cap screws, they may become worn and it may be necessary to replace them.

Retighten track cap screws after working 3 HOURS, 10 HOURS, and DAILY during the first week of operation.

RXA0147242-UN-11FEB15

Tighten fasteners to torque listed.

Track Undercarriage Torque	Front Idler Wheel (A) Cap Screws	1070 Nm (789 lb-ft)