Implements Requiring Large Volumes of Oil

Do not add hydraulic oil to reservoir with engine running. Hydraulic reservoir can overflow.

Do not overfill the hydraulic reservoir.

Lower the implement to have maximum oil in the reservoir during the checking procedure.

Cycle all implement cylinders after starting tractor.

Do not overfill hydraulic reservoir. Lower implement to ensure maximum oil is in reservoir during oil level check.

Check the hydraulic oil reservoir sight gauge level. (See Transmission-Hydraulic Reservoir/Axle Oil Level in the Service - Check Section of this Operator’s Manual.)

Lower implement to ground to return the most oil to the reservoir.

Recheck oil level when implement is removed.

Add oil if required.

Drain any excess oil from hydraulic reservoir using reservoir drain plug.