Predelivery Checklist
Make a copy of this checklist and complete while performing.
Tractors equipped with 15 L engines will automatically
perform an initial engine regeneration after at least 4 hours of operation.
This procedure may have occurred prior to tractor delivery. If regeneration
begins, allow full completion of process. See Parked Exhaust Filter
Cleaning in Operating the Engine section of vehicle Operator's
Manual.
Tractor may not be equipped with some options listed.
The following inspection, adjustment and service work was performed
prior to delivery of this machine.
Perform following checks before operating
tractor:
□ 1. Engine oil level is between Low and Full marks.
□ 2. Coolant level is correct.
□ 3. Air cleaner elements are installed correctly.
□ 4. Air intake system clamps are tight.
□ 5. Transmission-hydraulic and axle oil levels are correct.
□ 6. Lubrication fittings are greased.
□ 7. Shields, guards, handrails and steps are installed
correctly.
□ 8. Exterior and interior labels are smooth and neat.
Tractor is free of:
□ 9. Coolant leaks.
□ 10. Engine oil leaks.
□ 11. Fuel leaks.
□ 12. Transmission, hydraulic and axle oil leaks.
□ 13. Paint defects.
Perform checks inside cab:
□ 1. Check for diagnostic trouble codes. If codes are present,
record codes and see Service ADVISOR™ to resolve and repair as needed.
Clear all codes.
□ 2. All brake systems operate correctly. >>
Service brakes
>> Hydraulic and air trailer brakes
>> Parking brake
>> Secondary brake
□ 3. Transmission operates correctly (including PARK position).
□ 4. Neutral start switch operates correctly.
□ 5. SCVs operate correctly.
□ 6. Hitch operates correctly.
□ 7. PTO operates correctly.
□ 8. Warning system lights and instrument displays and gauges
operate correctly.
□ 9. All lights operate correctly in all switch positions.
□ 10. Engine fast and slow idle are set correctly.
□ 11. Seat can be adjusted properly.
□ 12. Check seat belt integrity. Seat belt latches function
correctly.
□ 13. Doors operate correctly.
□ 14. Cab is clean and upholstery appearance neat.
□ 15. Premium radio region code set for location.
□ 16. Radio operates correctly.
□ 17. Washers and wipers operate correctly.
□ 18. Heater, ventilation and air conditioning system operates
correctly. For details see separate information leaflet in tractor
cab.
□ 19. All optional equipment is installed and operates correctly.
Dealer Services:
□ 1. Thoroughly wash tractor.
□ 2. Charge battery and set battery date code.
□
Muffler extension increases tractor height. Be aware
of clearance restrictions when transporting tractor. 3. Replace transport rain cap with muffler extension.
□ 4. Check and adjust tire pressure.
□ 5. Adjust wheel spacing for customer needs.
□ 6. Check track tread settings and track alignment.
□ 7. Check and adjust steering stops.
□
Failure to follow track tractor road transport recommendations
may void tractor warranty. See Transport section and General Track
Use Guidelines in Tracks – General Information section of this Operator’s
Manual. 8. Perform track system break-in procedure. See Perform
Track Systems Break-In in Break-In Service (100 Hours or Less) section
of this Operator’s Manual.
□
Retighten wheel bolts after working 3 hours and again
after 10 hours. Continue to tighten to specified torque daily during
first week of operation. 9. Tighten wheels and weights to specifications (even
if no adjustments are made).
□ 10. Tighten track drive wheel, drive wheel sleeve, idler
wheel and mid-roller cap screws to specifications (even if no adjustments
are made).
□ 11. Reposition all components from shipping to operating
positions (i.e. mirrors.)
□ 12. Adjust all lights, including extremity transport warning
lights and beacon light. Check all lights for compliance with local
regulations.
□ 13. Adjust hitch components and lock in position.
□ 14. Install Slow Moving Vehicle emblem (if required).
□ 15. Set up CommandCenter™ display to customer preference.
□ 16. Activate Automatic Exhaust Cleaning Mode in CommandCenter™.
□ 17. Install StarFire™ receiver.
□ 18. Set up JDLink™ customer account.
□ 19. Perform test drive. Verify correct function of all
systems, including transmission, brakes, and steering.
□ 20. Calibrate radar.
□ 21. Check for diagnostic trouble codes. If codes are present,
record codes and see Service ADVISOR™ to resolve and repair as needed.
Clear all codes.
Date and signature of dealer/service technician:
|
Service ADVISOR is a trademark of Deere &
Company
CommandCenter is a trademark of Deere &
Company
StarFire is a trademark of Deere & Company
JDLink is a trademark of Deere & Company
|
RX32825,0001838-19-20171031
|
|