Engine and Exhaust Compartments

Accumulated crop residue inside engine compartment can reduce engine and cooling system performance. If tractor has been operated in field conditions which might have caused debris accumulation, inspect and clean engine compartment as necessary.

Directing pressurized water at electronic/electrical components, connectors, bearings and hydraulic seals, fuel injection pump or other sensitive parts and components may cause product malfunctions. Reduce pressure, and spray at a 45° to 90° angle.

Directing pressurized air at electronic/electrical components or connectors, may cause buildup of static electricity and product malfunctions.

Never steam clean or pour cold water on an injection pump that is operating or hot. Pump could seize.

1. Shut engine off and allow time for engine to cool.

2. Open hood, see Open Hood in Service-General Information section of this Operator’s Manual.

3. Remove any crop or debris within engine and exhaust compartments, especially around turbocharger, exhaust manifold, and exhaust aftertreatment system.

4. Reinstall all shields. Close and securely latch hood.