SCV Control Lever—Extend Detent and Retract Detent Position

RXA0151814
RXA0151814-UN-13APR16

Move SCV control lever (A) rearward into extend detent (B) or forward into retract detent (C) to “click” detent position and release.

Lever returns to Neutral position, but flow continues at flow detent setting rate until detent time setting has elapsed. See Configure SCV - Standard Mode and Configure SCV - Independent Mode in this section of this Operator's Manual.

Flow timing begins when the lever returns to neutral after being in the extend or retract detent position for less than 0.8 seconds.

Adjust flow time setting so cylinder is fully extended when time has elapsed.

Cancel detent by moving SCV lever slightly forward or rearward from neutral into extend or retract position for more than 0.8 seconds.

TS36762,00001F3-19-20161121