SCV Control Lever—Extend and Retract Position

RXA0151813
RXA0151813-UN-13APR16

Pull SCV lever (A) rearward (B) to extend. Push lever forward (C) to retract. Oil flows to extend or retract cylinder at a rate that varies depending on how far lever is moved. Slowest oil flow is when lever is closest to neutral position.

When lever is released it returns to neutral and flow is stopped. Maximum desired flow can be set with CommandCenter™ See Configure SCV - Standard Mode and Configure SCV - Independent Mode in this section of this Operator’s Manual. Time detent settings are not active in extend or retract flow positions.

CommandCenter is a trademark of Deere & Company

TS36762,00001F4-19-20161121