Shifting PowrReverser™ Transmission

IMPORTANT: To prevent unnecessary wear, never "ride" the clutch by resting a foot on the pedal.

1. At tractor start-up, cycle clutch pedal (A) one time to disengage the engagement override valve (B). Tractor will not move until clutch pedal is cycled and engagement override valve is disengaged.


A-Clutch Pedal
B-Engagement Override Valve (Internal)

LV837

PowrReverser is a trademark of Deere & Company.

LV,5010DT,E -19-26MAY99-1/4

2. Use F-N-R lever (A) to select travel direction. Forward and reverse shifts can be made without depressing clutch pedal.


A-Forward-Neutral-Reverse (F-N-R) Lever

LV1983

LV,5010DT,E -19-26MAY99-2/4

3. Depress clutch pedal and stop tractor before shifting range shift lever (C).


C-Range Shift Lever

LV1736

Left-Hand Side

LV,5010DT,E -19-26MAY99-3/4

4. Depress clutch pedal before shifting gear shift lever (B). Gear shifts (1, 2, 3, 4) can be made on-the-go. Release clutch pedal gradually to take up load smoothly.


B-Gear Shift Lever

LV1734

Right-Hand Side

LV,5010DT,E -19-26MAY99-4/4