Using Implement Float (SCV No. 1 and No. 3 Only)

The control levers for SCV No. 1 and No. 3 both have a "Float" position. Push SCV No. 1 control lever (A) or SCV No. 3 lever (C) all the way forward to "Float" detent position.

NOTE: Lever must overcome strong spring resistance between retract and "Float" positions.

In "Float", cylinder is allowed to extend or retract freely (B).

IMPORTANT: When "Float" is not needed, move lever back to neutral position to prevent accidental use of "Float".

A-SCV No. 1 Control Lever
B-Extend Cylinder
C-SCV No. 3 Control Lever-If Equipped

LV,5010RC,I1 -19-25FEB99-1/1