Clean Transmission-Hydraulic Pickup Screen

NOTE: The approximate transmission case oil capacity for CollarShift and SyncShuttle ™ Transmission is 38 L (10 gal). The approximate transmission case oil capacity for PowrReverser ™ Transmission is 42.5 L (11 gal).

1. Drain transmission-hydraulic oil. (See Change Transmission-Hydraulic Oil and Filter in this section.)

SyncShuttle is a trademark of Deere & Company.
PowrReverser is a trademark of Deere & Company.

LV,5010S12,B -19-21MAY99-1/3


2. Remove two cap screws (A) and remove screen cover (B).

3. Remove screen and examine it for damage. Replace if necessary. Clean screen in solvent and blow dry with compressed air.

4. Carefully install screen so the front of screen is inserted in hole at front of differential case.

5. Fill system with transmission-hydraulic oil. (See Changing Transmission-Hydraulic Oil and Filter in this section.)

M46986

LV,5010S12,B -19-21MAY99-2/3


6. Check oil level at dipstick (C) after filling, and again after operating for five minutes.


C-Transmission-Hydraulic Oil Dipstick

M46987

LV,5010S12,B -19-21MAY99-3/3