Replace Warning Light Bulb-Cab

NOTE: Bulb replacement procedures for front and rear warning lights are the same. Front right-hand warning light shown.

1. Remove screws (A) securing warning light to housing.

2. Remove warning light (B) from housing.

3. Turn and remove bulb retainer (C) from back of light (B).

4. Push and twist to release bulb from socket.

5. Reverse this procedure to reassemble warning light.


A-Warning Light Mounting Screw
B-Warning Light
C-Bulb Retainer

LV1500
LV1501

LV,SEIP,TTA3 -19-28MAY99-1/1