Replace Flood Light Bulb-Cab

NOTE: Bulb replacement procedures for front and rear flood lights are the same. Front right-hand flood light shown.

1. Remove screw (A).

2. Remove cover (B) and bulb from housing (C).

3. Disconnect wiring connector (D) from bulb.

4. Rotate bulb counterclockwise and remove.

5. Reverse this procedure to reassemble the flood light.

LV1503
LV1504


A-Screw
B-Cover
C-Housing
D-Wiring Connector

LV,SEIP,VVA3 -19-28MAY99-1/1