Adjusting Sway Blocks

NOTE: Check implement operator's manual for instruction on whether to allow side sway.

Sway blocks (A) are used to limit side sway of draft links.

If attachment (plow, disk) needs side sway in operating position, adjust sway blocks tight to the frame.

When needed to limit side sway, adjust blocks out away from frame to contact draft links and limit side-to-side motion.

Tighten lock nuts (B) after adjustment

A-Sway Block (2 used)
B-Lock Nut (2 used)

AG,OUO1043,192 -19-07JUN00-1/1