OMRE73927: 5320N, 5420N and 5520N Narrow Tractors, Block File: AG_OUO1043_214_19

Tread Settings-Adjustable Front Axle-Early Model Tractor

Front rims are offset. With some tires, this provides two tread spacings, at each axle setting.

IMPORTANT: After setting wheel spacing, tighten adjustable front axle wheel disk-to-flange bolts to specification. Drive tractor 100 m (109 yd) and tighten again.

Specification

Adjustable Front Axle Wheel Disk-to-Flange Bolts -Torque

175 N·m (130 lb-ft)

ADJUSTABLE FRONT AXLE TREAD SETTINGS Diagram A Centerline-to-Centerline
	Tread Position^a
Tire	1	2	3	4
6.50-16	999 mm (39.3 in.)	1099 mm (43.3 in.)	1199 mm (47.2 in.)	1299 mm (51.1 in.)
7.50-16	997 mm (39.2 in.)	1097 mm (43.2 in.)	1197 mm (47.1 in.)	1297 mm (51.0 in.)
27/9.5-15	1092 mm (43.0 in.)	1192 mm (46.9 in.)	1292 mm (50.8 in.)	1392 mm (54.8 in.)
^aTread position 1 is with axle adjustment at its most inward location. See Adjust Front Axle Tread Width in this section.

ADJUSTABLE FRONT AXLE TREAD SETTINGS Diagram B Centerline-to-Centerline
	Tread Position^a
Tire	1	2	3	4
6.50-16	1202 mm (47.3 in.)	1302 mm (51.3 in.)	1402 mm (55.2 in.)	1502 mm (59.1 in.)
7.50-16	1200 mm (47.2 in.)	1300 mm (51.2 in.)	1400 mm (55.1 in.)	1500 mm (59.0 in.)
27/9.5-15	1112 mm (43.8 in.)	1212 mm (47.7 in.)	1312 mm (51.6 in.)	1412 mm (55.6 in.)
^aTread position 1 is with axle adjustment at its most inward location. See Adjust Front Axle Tread Width in this section.

AG,OUO1043,214 -19-13NOV03-1/1