Rockshaft Control Levers

The rockshaft position is controlled by two levers, the rockshaft position control lever (A) and the rockshaft draft sensing control lever.

The rockshaft position control lever (A) raises the hitch when pulled rearward, and lowers the hitch when moved forward. (See Using Rockshaft Position Control in this section.)

A-Rockshaft Position Control Lever

AG,OUO1043,234 -19-11JUN00-1/2

The draft sensing control lever (A) controls hitch position relative to draft loads. (See Using Draft Control in this section.)

A-Rockshaft Draft Sensing Control Lever

AG,OUO1043,234 -19-11JUN00-2/2